All-Lifts Eye Hoist Hooks	Purchase hooks and swivels	Hardware Swivels Swivel Dimensions Swivel Hooks Sorting Hooks Alloy Slip Hooks Alloy Grab Hooks Cleavis Slip Hooks

Hoist hooks incorporate markings forged into the product which
address two (2) QUIC-CHECK^» features:

		Deformation Indicators - Two strategically placed marks, one just below the shank or eye and the other on the hook tip, which allows for a QUIC-CHECK» measurement to determine if the throat opening has changed, thus indicating abuse or overload.
		Angle Indicators - Indicates the maximum included angle which is allowed between two (2) sling legs in the hook. These indicators also provide the opportunity to approximate other included angles betweem two sling legs.

Hook ID Code *	Dimensions (in.)
	C	D	F	G	J	K	M	N	O	Q	T	AA
D	3.34	2.83	1.25	.73	.90	.63	.63	.36	.89	.75	.87	1.50
F	3.81	3.11	1.38	.84	.93	.71	.71	.42	.91	.91	.98	2.00
G	4.14	3.53	1.50	1.00	1.00	.88	.88	.55	1.00	1.13	1.03	3.00
H	4.69	3.97	1.63	1.13	1.13	.94	.94	.58	1.09	1.25	1.16	2.00
I	5.77	4.81	2.00	1.44	1.47	1.31	1.31	.72	1.36	1.56	1.53	2.50
J	7.37	6.27	2.50	1.81	1.75	1.66	1.66	.90	1.61	2.00	1.96	3.00
K	9.07	7.45	3.00	2.25	2.29	1.88	1.63	1.11	2.08	2.44	2.47	4.00
L	10.08	8.30	3.25	2.59	2.50	2.19	1.94	1.27	2.27	2.84	2.62	4.00
N	12.53	10.30	4.25	3.00	3.30	2.69	2.38	1.56	3.02	3.50	2.83	5.00
O	14.06	13.62	5.00	3.62	4.00	3.00	3.00	1.75	3.25	3.50	3.44	6.50
P	18.19	14.06	5.38	4.56	4.25	4.00	3.19	2.00	3.00	4.50	3.88	7.00
S	20.12	15.44	6.00	5.06	4.75	4.50	3.25	2.18	3.38	4.94	4.75	8.00
T	23.72	18.50	7.00	6.00	5.75	5.50	3.91	2.53	4.12	5.69	5.69	10.00

 

Working Load Limit (t)*		Hook ID Code	Eye Hook Stock No.			Weight Each (lbs.)
Carbon	Alloy		Carbon S-320C S.C.	Carbon G-320C Galv.	Alloy S-320A S.C.		S-4320 Stock No.	PL Stock No.	SS-4055 Stock No.
3/4†	1†	D	1022200	1022208	1022375	.61	1096325	--	--
1†	1-1/2†	F	1022211	1022219	1022386	.89	1096374	--	--
1-1/2†	2†	G	1022222	1022230	1022397	1.44	1096421	--	--
2†	3†	H	1022233	1022241	1022406	2.07	1096468	--	--
3†	5†	I	1022244	1022249	1022419	4.30	1096515	--	--
5†	7†	J	1022255	1022262	1022430	8.30	1096562	--	--
7-1/2†	11†	K	1022264	1022274	1022441	15.00	1096609	--	--
10†	15†	L	1022285	1022452	1022452	21.60	1096657	--	--
15†	22†	N	1022288	1022296	1022465	39.50	1096704	--	--
20	30	O	1023289	--	1023546	60.00	--	1093716	1090161
25	37	P	1023305	--	1023564	105.00	--	1093717	1090189
30	45	S	1023323	--	1023582	148.00	--	1093718	1090189
40	60	T	1023341	--	1023608	228.00	--	1093719	1090205

 

* NOTE: Eye Hooks (3/4 TC - 22TA), Proof load is 2.5 times Working Load Limit. Eye Hooks (20 TC - 60TA), Proof Load is 2 times Working Load Limit.  All carbon hooks-average straightening loads (ultimate load) is 5 times Working Load Limit.  Alloy eye hooks 1 ton through 22 ton-average straightening load (ultimate load) is 5 times Working Load Limit. Alloy eye hooks 30 tons through 60 tons-average straightening load (ultimate load) is 4.5 times Working Load Limit.  Alloy shank hooks 1 ton through 22 tons-average straightening load (ultimate load) is 5 times Working Load Limit.  Alloy shank hooks 30 tons through 60 tons-average straightening load (ultimate load) is 4.5 times Working Load Limit.  All bronze hooks-average straightening load (ultimate load) is 4 times Working Load Limit.

back to top of page