| Creative Lift Magnets - Ceramic Magnet Material |
 |
|
Ideal
for lifting steel plate, forgings, die
casting and similar items!
Creative Lift Magnets are the proven solution to simplified machine loading and unloading, for handling steel items in receiving and shipping areas and for the fast stacking, de-stacking and transfer of steel sheets, plates, bar stock, angles and rounds. One person can perform operations previously calling for two or more people.
|
|
|
|
|
|
 • Non-marring Roller Cam Release
• Less torque required to release part
• Lift capacity clearly stated on magnet
• No Electrical power required for operation
• Durable stainless steel casing
• Use only on thick (1" or thicker), non-flexing ferrous items.
Features: The safety of a permanent magnet, strong eye bolt for heavy duty use and a quick non-marring release lever.
Order Online: Click on desired part number below to add to cart. Please see charts below for additional info on Holding Values.
|
|
|
|
Lbs. of Hold
|
Part No.
|
Total Length
|
Total Width
|
Total Height
|
Magnet Height
|
Magnet Length
|
Weight
(lbs.)
|
400 |
5C1382
|
9-7/8” |
3-1/2” |
9-1/4” |
3-3/16” |
6” |
12 |
1000 |
5C1383
|
12-5/8” |
5” |
9-1/4” |
3-3/16” |
8-11/16” |
28 |
1500 |
5C1384
|
14-7/16” |
7” |
20” |
3-3/16” |
10-1/2” |
42 |
1250 |
5C1385
|
19-5/8” |
3-1/2” |
20” |
3-3/16” |
15-3/4” |
49 |
3000 |
5C1386
|
19-5/8” |
10” |
20” |
3-3/16” |
15-3/4” |
105 |
|
|
|
Note:
Never stand under load being
lifted. Always use extra caution.
Only use magnetic lifts on material that
does not flex or bend. The surface
of the lift, and the load being lifted,
need to be clean and free of chips, oil,
slag, dirt, etc. Lifts must be centered
on load. Not recommended for painted
or finish coated surfaces.
|
|
|
|
.
Working Holding Values for Specified Material Thickness
|
Stated
Value |
Part No. |
3/16" |
1/4" |
3/8" |
1/2" |
3/4" |
1" |
| 400 lbs. |
5C1382 |
400 lbs. |
400 lbs. |
400 lbs. |
400 lbs. |
400 lbs. |
400 lbs. |
| 1000 lbs. |
5C1383 |
600 lbs. |
900 lbs. |
1000 lbs. |
1000 lbs. |
1000 lbs. |
1000 lbs. |
| 1500 lbs. |
5C1384 |
650 lbs. |
1000 lbs. |
1500 lbs. |
1500 lbs. |
1500 lbs. |
1500 lbs. |
| 1250 lbs. |
5C1385 |
800 lbs. |
1000 lbs. |
1250 lbs. |
1250 lbs. |
1250 lbs. |
1250 lbs. |
| 3000 lbs. |
5C1386 |
800 lbs. |
1000 lbs. |
1800 lbs. |
2700 lbs. |
3000 lbs. |
3000 lbs |
|
|
|
|
.
Maximum Sheet Size for Specified Material Thickness
|
Stated
Value |
Part No. |
3/16" |
1/4" |
3/8" |
1/2" |
3/4" |
1" |
| 400 lbs. |
5C1382 |
4' X 6' |
4' X 8' |
*4' X 6' |
*4' X 4' |
*4' X 3' |
*3' X 3" |
| 1000 lbs. |
5C1383 |
4' X 6' |
4' X 8' |
4' X 8' |
4' X 8' |
4' X 8' |
4' X 6' |
| 1500 lbs. |
5C1384 |
4' X 6' |
4' X 8' |
4' X 8' |
4' X 8' |
4' X 8' |
4' X 6' |
| 1250 lbs. |
5C1385 |
4' X 6' |
4' X 8' |
4' X 8' |
4' X 8' |
4' X 8' |
*4'' X 8' |
| 3000 lbs. |
5C1386 |
4' X 6' |
4' X 8' |
4' X 8' |
4' X 8' |
4' X 8' |
5' X 10 |
* These maximum sheet sizes are recommended due to the weight of the specified sheet. All other maximum sheet sizes are selected due to the sag characteristics of the specified sheet.
Note: When lifting sheets over 4' x 8', use 2 or more lifts on a spreader bar to prevent sheet flexing, sagging or peel-off. Material less than 3/8" thick is susceptible to magnetic bleed through, resulting in two sheets being lifted at once. Magnetic sheet fanners can be used to ensure that only one sheet is lifted at a time. |
|
|
|
|
|
|
|
|
|
|
| |
Lift Magnet Calibration Services: We can perform an annual lift magnet calibration check on your permanent lift magnet to ensure it's performing to optimal levels. |
|
