|
|
|
|
|
|
|
|
 |
| All-Lifts Hoist Rings Metric |
|
|
| |
|
|
|
|
|
 |
Top washer has the following features:
- The Working Load Limit and Recommended Torque value are permanently stamped into each washer.
- Washer is color coded for easy identification: Silver - Metric thread
- Bolt specification is a Grade 12.9 Alloy socket head cap screw to Din 912. All threads listed are metric (ASME/ANSI B18.3.1m).
- BOLT SIZE IDENTIFICATION : The size of the bolt will be stated as in the drawing below. Illustration shows meaning of each dimension given.
- NOTE: For Special Applications call
your All-lifts, Inc. Representative at
1-800-342-4188
|
|
HR-125M
METRIC THREADS
HR-125M
Stock
No. |
Working Load
Limit
(kg) |
HR-125M Metric Swivel Hoist Rings* |
Dimensions
(mm) |
Est.
Weight
(kg) |
At a
5:1
Design
Factor |
At a
4:1
Design
Factor |
Torque**
in
NM |
Bolt Size
(mm)
(A) |
Effective
Thread
Projection
Length
(mm)
(B) |
C |
D |
Radius
E |
Diameter
F |
G |
H |
1016602 |
400 |
500 |
10 |
M8X 1.25 X 40 |
16.9 |
68.1 |
25.4 |
11.8 |
8.5 |
42.9 |
28.2 |
.19 |
1016613 |
450 |
550 |
16 |
M10 X 1.50 X 40 |
16.9 |
68.1 |
25.4 |
11.8 |
8.5 |
42.9 |
27.69 |
.19 |
1016624 |
1050 |
1300 |
38 |
M12 X 1.75 X 50 |
17.2 |
124.5 |
50.8 |
22.3 |
17.5 |
82.7 |
58.17 |
1.13 |
1016635 |
1900 |
2400 |
81 |
M16 X 2.00 X 60 |
27.2 |
124.5 |
50.8 |
22.3 |
17.5 |
82.7 |
56.13 |
1.22 |
1016644 |
2150 |
2700 |
136 |
M20 X 2.50 X 65 |
31.2 |
124.5 |
50.8 |
22.3 |
17.5 |
82.7 |
52.07 |
1.36 |
1016657 |
3000 |
3750 |
136 |
M20 X 2.50 X 75 |
28.1 |
167.0 |
76.2 |
34.7 |
24 |
120.1 |
75.69 |
3.18 |
1016668 |
4200 |
5250 |
312 |
M24 X 3.00 X 80 |
33.1 |
167.0 |
76.2 |
34.7 |
24 |
120.1 |
74.93 |
3.18 |
1016679 |
7000 |
8750 |
637 |
M30 X 3.50 X 120 |
65.1 |
231.5 |
95.3 |
44.5 |
30.5 |
152.4 |
69.34 |
6.70 |
1016690 |
1100 |
13750 |
1005 |
M36 X 4.00 X 150 |
60.6 |
315.3 |
121 |
57.2 |
43 |
203.2 |
124.20 |
14.95 |
1016701 |
12500 |
15600 |
1005 |
M42 X 4.50 X 160 |
70.6 |
315.3 |
121 |
57.2 |
43 |
203.2 |
150.62 |
16.33 |
1016712 |
13500 |
16900 |
1350 |
M48 X 5.00 X 160 |
70.6 |
315.3 |
121 |
57.2 |
43 |
203.2 |
137.92 |
16.33 |
| * |
Design to be used with ferrous work piece only. |
| ** |
The tightening torque values shown are based upon threads being clean, dry and free of lubrication. |
| |
Individually proof loaded to 2-1/2 times Working Load Limit based on the 4:1 design factor. |
| |
Bolt specification is a Grade 12.9 Alloy socket head cap screw to Din 912. All threads listed are metric (ASME/ANSI B18.3.1m). |
|
|
| |
|
|
| |
|
|
|
 |
 |
Site
optimized for Microsoft Internet Explorer and Netscape Navigator
versions 4 and above.
Entire contents of www.all-lifts.com © Copyright 2002,All-Lifts
Inc. All rights reserved.
Reproduction in whole or in part is prohibited.
Site designed by: J.E.G.
Design
|
|
