Hoist hooks
incorporate markings forged into the product which address
two (2) QUIC-CHECK» features:
S-322N
Patented
trademark indicates
QUIC-CHECK»
product.
|
|
|
Deformation
Indicators -- Two strategically placed marks,
one just below the shank or ey and the other on
the hook tip, which allows for a QUIC-CHECK»
measurement to determine if the throat opening
has change, thus indicating abuse or overload.
To
check, use a measuring device (i.e., tape measure)
to measure the distance between the marks.
The marks should align to either an inch or half-inch
increment on the measuring device. If the measurement
does not meet this criteria, the hook should be
inspected further for possible damage.
Angle Indicators „ Indicates the maximum included
angle which is allowed between two (2) sling legs
in the hook. These indicators also provide
the opportunity to approximate other included
angles between two sling legs.
|
|
Working Load
Limit
(t)*
|
S-322CN
Stock No. |
S-322AN
Stock No.
|
Weight
Each
(lbs.) |
Dimensions
(in.) |
Rep.
Latch
Stock No.
|
|
Carbon |
Alloy |
A |
B |
C |
D |
F |
G |
H |
J |
K |
L |
M |
O |
R |
S |
AA |
3/4 |
1 |
1048600 |
1048804 |
.75 |
2.00 |
.82 |
1.25 |
2.86 |
1.25 |
.73 |
.81 |
.93 |
.63 |
5.66 |
.63 |
.93 |
4.55 |
.38 |
1.50 |
1096325 |
1 |
1-1/2 |
1048609 |
1048813 |
1.25 |
2.50 |
1.31 |
1.50 |
3.15 |
1.38 |
.84 |
.94 |
.97 |
.71 |
6.71 |
.71 |
.97 |
5.37 |
.50 |
2.00 |
1096374 |
1-1/2 |
2 |
1048618 |
1048822 |
2.25 |
3.00 |
1.50 |
1.75 |
3.59 |
1.50 |
1.00 |
1.16 |
1.06 |
.88 |
7.75 |
.88 |
1.06 |
6.12 |
.63 |
2.00 |
1096421 |
2 |
3 |
1048627 |
1048831 |
2.30 |
3.00 |
1.50 |
1.75 |
4.00 |
1.62 |
1.13 |
1.31 |
1.19 |
.94 |
8.25 |
.94 |
1.16 |
6.50 |
.63 |
2.00 |
1096468 |
3 |
5 |
1048636 |
1048837 |
4.96 |
3.50 |
1.64 |
2.00 |
4.84 |
2.00 |
1.44 |
1.63 |
1.50 |
1.31 |
9.69 |
1.13 |
1.41 |
7.50 |
.75 |
2.50 |
1096515 |
5 |
7 |
1048645 |
1048854 |
10.29 |
4.56 |
2.29 |
2.50 |
6.28 |
2.50 |
1.81 |
2.06 |
1.78 |
1.66 |
12.47 |
1.44 |
1.69 |
9.63 |
1.00 |
3.00 |
1096562 |
7-1/2 |
11 |
1048654 |
1048865 |
16.18 |
5.00 |
2.53 |
2.75 |
7.54 |
3.00 |
2.25 |
2.63 |
2.41 |
1.88 |
14.75 |
1.63 |
2.22 |
11.37 |
1.13 |
4.00 |
1096609 |
10 |
15 |
1048663 |
1048877 |
23.25 |
5.62 |
2.48 |
3.12 |
8.34 |
3.25 |
2.59 |
2.94 |
2.62 |
2.19 |
16.40 |
1.94 |
2.41 |
12.25 |
1.25 |
4.00 |
1096657 |
15 |
22 |
1048672 |
1048886 |
47.00 |
7.10 |
3.76 |
4.10 |
10.34 |
4.25 |
3.00 |
3.50 |
3.41 |
2.69 |
21.34 |
2.38 |
3.19 |
16.71 |
1.50 |
5.00 |
1096704 |
— |
30 |
— |
1025688 |
70.50 |
7.10 |
3.76 |
4.10 |
13.62 |
5.00 |
3.61 |
4.63 |
4.00 |
3.00 |
23.25 |
3.00 |
3.25 |
18.01 |
1.50 |
6.50 |
1093716 |
U.S.
Patents 5,381,650 & 5,193,480 & 5,103,755 and
foreign equivalents.
SEE
APPLICATION AND WARNING INFORMATION
322C
- Carbon Steel 322A - Hook and Bail-Alloy Steel.
Ê
Dimensions for hooks 3/4 ton carbon through 2 ton carbon
are for 4055 latch kit. Dimensions for hooks 3
ton carbon and larger are for PL latch kit.
*
NOTE: Proof load is 2 times Working Load Limit.
All carbon swivel hooks - average straightening load
(ultimate load) is 5 times Working Load Limit.
All Alloy swivel hooks - average straightening load
(ultimate load) is 4.5 times the Working Load Limit.
|
This
hook is a positioning device and is not intended
to rotate under load. For swivel hooks
designed to rotate under load.
Use in salt water requires shank and nut inspection
in accordance with A.S.M.E. B30.10-1.2.1(b)(2)(c)
1996.
|
back
to top of page
