All-Lifts
Cold Tuff Shackles

   

     

G-2130CT
Bolt Type Anchor shackle with thin head bolt - nut with cotter pin. Meets the performance requirements of Federal Specification RR-C271D Type IVA, Grade A, Class 3, except for those provisions required of the contractor.
BOLT TYPE ANCHOR SHACKLES
1.Working Load Limit permanently shown on every shackle.
2.Forged - Quenched and Tempered, with alloy bolt.
3.Type Approval and certification in accordance with DNV Specification 2.7-1 and DNV rules for Lifting Appliances - Loose Gear.
4.Fatigue Rated.
5.All sizes are individually proof tested to 2.2 times the Working Load Limit.
6.Finish is Inorganic Zinc Primer.
7.Individually Serialized with Certification.
8.Bow and Bolt are Certified to meet charpy impact testing of 32 ft-lbs. min. ave. at -4Á F.









Dnvlogo.jpg (2545 bytes)

Nominal
Shackle
Size
(in.) 		Working
Load
Limit *
(tons) 		G-2130CT
Stock No. 		G-2130CT
Weight
Each
(lbs.) 		Dimensions
(in.) 		Tolerance
+/-
A B C D E F H L N P A C
3/4 4-3/4 1260568 2.72 1.25 .88 2.81 .75 2.00 1.81 4.97 3.50 .81 4.25 .06 .25
1 8-1/2 1260586 5.66 1.69 1.13 3.75 1.03 2.69 2.38 6.56 4.69 1.06 5.38 .06 .25
1-1/4 12 1260604 11.71 2.03 1.38 4.69 1.29 3.25 3.00 8.25 5.75 1.38 6.63 .06 .25
1-1/2 17 1260622 20.80 2.38 1.63 5.75 1.54 3.88 3.63 10.00 6.88 1.62 7.66 .13 .25
1-3/4 25 1260633 33.91 2.88 2.00 7.00 1.84 5.00 4.19 12.34 8.86 2.25 9.19 .13 .25

* NOTE:  Maximum Proof Load is 2.2 times the Working Load Limit.  Minimum Ultimate Load is 6 times the Working Load Limit. 
Individually Proof Tested with certification, and furnished with Round Head Bolts.


G-2140CT
1.G-2140 meets the performance requirements of Federal Specifications RR-C-271D, Type IVA, Grade B, Class 3, except for those provisions required of the contractor.
2.Working Load Limit is permanently shown on every shackle.
3.Shackles are certified in accordance with DNV Specification 2.7-1 and DNV rules for Lifting Appliances - Loose Gear.
4.Forged Alloy bows, Alloy Bolts.
5.Quenched and Tempered.
6.All sizes are individually proof tested to 2.2 times the Working Load Limit.
7.Finish is Inorganic Zinc Primer.
8.Individually Serialized with Certification.
9.Bow and Bolt are Certified to meet charpy impact testing of 32 ft-lbs. min. ave. at -4Á F.

Nominal
Shackle
Size
(in.) 		Working
Load
Limit *
(tons) 		G-2140CT
Stock No. 		Weight
Each
(lbs.) 		Dimensions
(ins.) 		Tolerance
+/-
A B C D E F H L N P A C
1-1/2 30 1260801 20.8 2.38 1.63 5.75 1.54 3.88 3.63 10.00 6.88 1.62 7.66 .13 .25
1-3/4 40 1260812 33.9 2.88 2.00 7.00 1.84 5.00 4.19 12.34 8.86 2.25 9.19 .13 .25
2 55 1260823 52.0 3.25 2.25 7.75 2.08 5.75 4.81 13.68 9.97 2.40 10.16 .13 .25
2-1/2 85 1260834 96.0 4.12 2.75 10.50 2.72 7.25 5.69 17.84 12.87 3.12 12.94 .13 .25

* NOTE: Maximum Proof Load is 2.2 times the Working Load Limit. Minimum Ultimate Load is 6 times the
Working Load Limit.  Individually Proof Tested with certification, and furnished with Round Head Bolts.



back to top of page

 
 

Site optimized for Microsoft Internet Explorer and Netscape Navigator versions 4 and above.
Entire contents of www.all-lifts.com © Copyright 2002,All-Lifts Inc. All rights reserved.
Reproduction in whole or in part is prohibited.
Site designed by: J.E.G. Design